customized Silicon SIC mould silicon SSIC RBSIC mold

Short Description:

Pressureless sintered silicon carbide (SSIC) is produced using very fine SiC powder containing sintering additives. It is processed using forming methods typical for other ceramics and sintered at 2,000 to 2,200° C in an inert gas atmosphere.As well as fine-grained versions, with grain sizes < 5 um, coarse-grained versions with grain sizes of up to 1.5 mm are available.


Product Detail

Product Tags

Silicon SIC mold silicon SSIC RBSIC mold

 

Pressureless sintered silicon carbide (SSIC) is produced using very fine SiC powder containing sintering additives. It is processed using forming methods typical for other ceramics and sintered at 2,000 to 2,200° C in an inert gas atmosphere.As well as fine-grained versions, with grain sizes < 5 um, coarse-grained versions with grain sizes of up to 1.5 mm are available.

     SSIC is distinguished by high strength that stays nearly constant up to very high temperatures (approximately 1,600° C), maintaining that strength over long periods!

 

Product advantages:

High temperature oxidation resistance

Excellent Corrosion resistance

Good Abrasion resistance

High coefficient of heat conductivity
Self-lubricity, low density
High hardness
Customized design.

 

Technical properties:

Items Unit Data
Hardness HS ≥110
Porosity Rate % <0.3
Density g/cm3 3.10-3.15
Compressive MPa >2200
Fractural Strength MPa >350
Coefficient of  expansion 10/°C 4.0
Content of Sic % ≥99
Thermal conductivity W/m.k >120
Elastic Modulus GPa ≥400
Temperature °C 1380

 

  Silicon SIC mould silicon SSIC RBSIC mold

 

More Products

 Silicon SIC mould silicon SSIC RBSIC mold


  • Previous:
  • Next:

  • WhatsApp Online Chat !